1、 Whether it is a full-automatic filling machine or a semi-automatic filling machine, its main function is to fill down accurately. It is necessary to fill down accurately. Weighing is the first consideration. It is obvious that the accuracy of normal sensors has different indicators. Buyers can see at a glance when selecting them, but the stability of many sensors is not affected by external air pressure and static electricity, Therefore, the buyer's method of identification is still to experiment in person or have a certain amount of time for investigation before making a decision.
2、 Down is always a valuable consumable in the process of processing, so the advantages and disadvantages of the down feeding device can directly reflect the damage degree of the machine to down. The down feeding method is naturally one-time. The continuous transmission of down cutting can greatly reduce consumption and ensure the integrity of each down, and then improve the quality of products.
Third, after the selection of basic equipment, buyers tend to overlook the air compressor. It seems that the air compressor has little to do with the selection of the flocking machine, but it is very important in operation. For one thing, the air compressor determines whether the amount of flocking is stuck or not. At the same time, it is also a difficult problem in sorting out the flocking machine in subsequent operations and the key to ensure long-term use. When selecting, more attention should be paid to classification, According to the nature of the filling machine, select a small silent oil-free air compressor or a permanent magnet variable frequency screw machine to use together, so as to achieve the service life of the machine and the convenience of later maintenance.
Article source: Jiangmen filling machine http://www.jm-weishi.com/
06-30
Jiangmen down filling machine: the correct maintenance method for down jackets
It is forbidden to wash down clothes with alkaline substances, stir them with washing machine or rub them with hands, twist them, and bake them with open fire. The correct maintenance method for down
12-06
The filling machine makes strange noises when it works
1. If the bearing is in good running condition, it will announce low whine or buzz. If sharp hiss, squeak and other irregular movements are announced, it often indicates that the bearing is in a bad c
12-05
These matters are very important if you want to use the filling machine well
The automatic filling machine is good, and these maintenance are very necessary. Let the Snow Leopard filling machine take us to improve our common sense!Daily maintenance items1. Use an air gun to c
12-04
What are the advantages and characteristics of the filling machine system
1、 The system hardware has reliability and long service lifeAs the primary control element of the automatic filling machine is programmable, and the controller and proximity switch with variable freq