The down filling machine has the following methods for filling down the down quilt:
1. Filling of filling machine
First of all, use an electronic scale to weigh the down. After the gross weight is reached, step on the button switch, so that the filling machine can suck up the down at one time. Clothes are sheathed on the inlet and outlet of the centrifugal fan, and the centrifugal fan blows down into the garment compartment. The advantage of this type of method is that small down filled tubes with a diameter of 18mm can be used to fill narrow and long garment components. It is difficult to seal this position with craftsmanship. In the whole process of filling, the wind will blow the down loose, which is conducive to flattening the clothes in the post process flow. Export commodity rules try to avoid human touch down. The processing factory can use the filling machine to manufacture the duvet, improve the new products, the production and processing of the duvet is simple, and the economic benefit is high. Its disadvantage is that the distance between the weighing and filling of down and the technological manufacturing speed is not large, so the working environment with wind filling cannot avoid a small amount of down.
Filling machine
2. Use craft to make and expand filling
Put an open 400500400mm box on the electronic device counter scale, which is full of oil down, so that the electronic scale will display the information as 0. Use the down in the handle box to immediately plug it into the garment compartment, and the electronic scale will display the added gross weight. The use of down for down clothing is small, and most of the safety channels for filling are short, so it is generally possible to use craftsmanship to make filling. Down is not damaged or worn.
3. Unfold filling with funnel
On the electronic device desk scale, place a thin tin funnel with the upper opening diameter of 200mm, the lower hole of 100 and the height of 200. (2-3 funnels with different dimensions can be made according to the specific standards of clothing) Make the electronic scale display information 0, and tightly plug the handle down in the funnel to the required gross weight. Then point the funnel to the garment compartment and poke it from the top of the funnel into the garment.
4. Full automatic filling machine
Filling machine用两个羽绒全自动称重桶,交替称重羽绒,员工把被子隔层套在充绒口边,设备全自动把桶内称重好的羽绒吹进,它的优势是速率比人力快30%,而且当场齐整,奢华同,它的缺点是:价格比较贵。占地面积20-30平米。羽绒全自动数次循环系统,耗费大,而且毛重仍然有误差。
Article source: Jiangmen filling machine http://www.jm-weishi.com/
06-30
Jiangmen down filling machine: the correct maintenance method for down jackets
It is forbidden to wash down clothes with alkaline substances, stir them with washing machine or rub them with hands, twist them, and bake them with open fire. The correct maintenance method for down
12-06
The filling machine makes strange noises when it works
1. If the bearing is in good running condition, it will announce low whine or buzz. If sharp hiss, squeak and other irregular movements are announced, it often indicates that the bearing is in a bad c
12-05
These matters are very important if you want to use the filling machine well
The automatic filling machine is good, and these maintenance are very necessary. Let the Snow Leopard filling machine take us to improve our common sense!Daily maintenance items1. Use an air gun to c
12-04
What are the advantages and characteristics of the filling machine system
1、 The system hardware has reliability and long service lifeAs the primary control element of the automatic filling machine is programmable, and the controller and proximity switch with variable freq