Whether it was manual filling machine or semi-automatic filling machine in the past, the problem of banning the weighing of full-automatic filling machine today seems to have been unable to be handled very well, which makes many manufacturers worried. Even some manufacturers have chosen to abandon automatic filling after many debugging and recuperation, while choosing the troublesome manual filling method from scratch, and the low efficiency also requires workers to be very high. Is there no solution?
Today, Jiangmen filling machine will take you to see the root cause of the problem to suit the remedy to the case.
1. Sensor, the quality of the sensor directly affects the accuracy of weighing, and its own weighing can imagine the pressure sensor as a module in the scale, so its stability directly affects the skills of the filling machine. It should also be selected as a top priority.
2. Appearance. The appearance is a structure that directly contacts the sensor, and directly transmits the information of the sensing part to the next step. Therefore, the stability of their connection and coordination is also closely related to the displayed weighing display. However, the appearance is simply ignored by many manufacturers.
3. Electrostatic problem. After solving the problem of the basic weighing equipment of the machine itself, many manufacturers still find that there is a big error in the filling time they choose, so it is time to check the additional items. Due to the soft and boring nature of down, many static problems will occur after conflicts in the machine, and static problems are also the reason why many manufacturers find it increasingly forbidden to accurately weigh down at the beginning. Static electricity will affect the accuracy of the machine to a large extent, which is an important part of improving the requirements of the machine. Outstanding grounding treatment and insulation treatment of the machine itself are particularly important at this moment. To some extent, the treatment of electrostatic problems also plays a major role in extending the service life of machinery.
4. In addition to the above problems, the selection of air compressors in the use of the machine and the control of air flow will also have a certain impact on the quality of the direct display, including too much residual down during the later maintenance, and the same blocking problem will have a certain impact. Only when we pay more attention to the selection and maintenance, the quality problem is never an unsolvable problem. I wish you a happy day and easy handling of machine selection and maintenance!
Article source: Jiangmen filling machine http://www.jm-weishi.com/
06-30
Jiangmen down filling machine: the correct maintenance method for down jackets
It is forbidden to wash down clothes with alkaline substances, stir them with washing machine or rub them with hands, twist them, and bake them with open fire. The correct maintenance method for down
12-06
The filling machine makes strange noises when it works
1. If the bearing is in good running condition, it will announce low whine or buzz. If sharp hiss, squeak and other irregular movements are announced, it often indicates that the bearing is in a bad c
12-05
These matters are very important if you want to use the filling machine well
The automatic filling machine is good, and these maintenance are very necessary. Let the Snow Leopard filling machine take us to improve our common sense!Daily maintenance items1. Use an air gun to c
12-04
What are the advantages and characteristics of the filling machine system
1、 The system hardware has reliability and long service lifeAs the primary control element of the automatic filling machine is programmable, and the controller and proximity switch with variable freq